IV. Water Details
Adobe Reader is required to view these documents. Click here for free download.
- Method of Testing Water Mains W/1.0
- 2-inch Air Valve in Manhole for 24-inch Diameter and Smaller Pipelines W/2.0
- Vent Box for Extended Air Release Pipe W/2.0a
- Vent Box for Air/Vacuum Valve Vault On 30-inch Diameter and Larger Pipes W/2.0b
- Shallow Type 2-inch Air Valve in Manhole For 24-inch Diameters and Smaller Pipelines W/2.0c
- Shallow Type 2-inch Air Valve in Manhole For 24-inch Diameters and Smaller Pipelines W/2.0d
- Adjustable Valve Box Round Head Sliding Type W/2.1
- Extension Stems and Valve Boxes for Deep Valve Settings W/2.2
- 16-inch, 20-inch, 24-inch, 30-inch and 36-inch Horizontal Valve Installations W/2.4
- 16-inch, 20-inch, 24-inch, 30-inch and 36-inch Horizontal Valve Installations W/2.4a
- Cast in Place Concrete Vault for 16-inch, 20-inch, and 24-inch Horizontal Valves W/2.5
- Cast in Place Concrete Vault for 30-inch and 36-inch Horizontal Valves W/2.5a
- 16-inch and 20-inch Vertical Valves Installation W/2.6
- Cast in Place Concrete Vault for 16-inch and 20-inch Vertical Valves W/2.7
- Polyethylene Encasement at Concrete Interface W/2.8
- Type "A" Blowoff for Water Mains 16-inch to 30-inch W/3.0
- Endwall Detail for Type "B" Blowoff W/3.01
- Type "A" Blowoff for Water Mains 36-inch and Larger W/3.02
- Type "B" Blowoff for Water Mains 36-inch and Larger W/3.03
- Type "B" Blowoff Profiles for Water Mains 16-inch and Larger W/3.04
- Piping Support at Welded-on Connection W/3.05
- Welded-on Connection for Blowoffs on Mains 36-inch and Larger W/3.06
- Blow-off Connection in Non-Traffic Areas for 4-inch and 6-inch Water Mains W/3.07
- Blow-off Connection in Traffic Areas for 4-inch and 6-inch Water Mains W/3.08
- Pressure Reducing Valve Vault Type “1” Layout W/4.2
- Pressure Reducing Valve Vau lt Type “2” Layout W/4.3
- Type “1” and “2” Pressure Reducing Valve Vault Piping Layout W/4.4
- Pressure Relief Valve Vault W/4.5
- Endwall for Pressure Relief Valve Piping W/4.6
- Dual Pressure Relief Valve Vault W/4.7
- Pressure Relief Valve Vault Piping Plan W/4.8
- 4-inch, 6-inch, and 8-inch F.M. Meter Vault W/5.0
- 4-inch, 6-inch, 8-inch, and 10-inch F.M. Meter Vault Piping Layout W/5.0a
- 4-inch FM Meter with Check Valve Vault W/5.0b
- 6-inch and 8-inch FM Meter with Check Valve Vault W/5.0c
- 4-inch, 6-inch and 8-inch F.M. Meter with Check Valve in Vault Piping Layout W/5.0d
- Remote Reading Device for Meter location in Roadway W/5.0e
- Fire Hose Connection for FM Meter, Ultrasonic Meter, and Detector Check Vault Layouts W/5.0f
- 10-inch F.M. Meter Vault W/5.0g
- Fire Hose Connection in Traffic Areas for FM Meter, Ultrasonic Meter, and Detector Check Vault Layouts W/5.0h
- 10-inch FM Meter Vault with Check Valve Vault W/5.0i
- Fire Hose Connection in Traffic Areas for FM Meter Ultrasonic and Detector Check Precast Vault Layouts W/5.0j
- 3-inch, 4-inch, and 6-inch Compound Meter Vault W/5.1
- 3-inch, 4-inch, and 6-inch Compound Meter Vault Piping Layout W/5.1a
- Cast in Place Concrete Top Slab Reinforcing Details W/5.2
- Cast in Place Concrete Top Slab Reinforcing Details W/5.21
- Cast in Place Concrete Top Slab for Type “1” Layout Pressure Reducing Valve Vaults W/5.22
- Cast in Place Concrete Top Slab for dual pressure relief and Type “2” Layout Pressure Reducing Valve Vaults W/5.23
- Cast in Place Concrete Top Slab for Ultrasonic Meter, FM Meter, and Detector Check Vaults W/5.24
- Cast in Place Concrete Top Slab for Ultrasonic Meter and FM meter with Check Valve Vault W/5.25
- Cast in Place Concrete Top Slab for 10-inch FM Meter with Check Valve Vault W/5.26
- Cast in Place Concrete Vault W/5.3
- Cast in Place Concrete Vault Notes W/5.4
- Top Slab Details for Vaults W/5.5
- 3/4-inch Meter Setting for 1-inch Service W/5.6
- 1-inch Meter Setting for 1-1/2-inch Service W/5.7
- 1-1/2-inch Meter Settings for 2-inch Service W/5.8
- 2-inch Meter Settings for 4-inch Service W/5.9
- 2-inch Meter Settings for Existing 2-inch Meter Replacement W/5.9a
- 1-inch, 1-1/2-inch and 2-inch Water House Connections for Inside Meters W/5.10
- 1-inch, 1-1/2-inch and 2-inch Water House Connections for Inside Meters, Rural Type Paving Section W/5.11
- 4-inch thru 12-inch Ductile Iron Water Connection W/5.12
- Location of Outside Meters for 1-inch, 1-1/2-inch & 2-inch Water House Connections Closed Paving Section W/5.13
- 1-inch, 1-1/2-inch and 2-inch Water House Connections and Outside Meter Locations Rural Paving Sections W/5.14
- Double 3/4-inch Meter Setting W/5.15
- Double 1-inch Meter Setting W/5.15a
- Existing Outside Meter Temporary Water Service for Water Main Replacement W/5.16
- Existing Inside Meter Setting Temporary Water Service for Water Main Replacement W.5.16a
- Ductile Iron Pipe Load Chart W/6.0
- Polyvinyl Chloride (PVC) Pipe (AWWA C900/905) Load Chart W/6.1
- 1-inch and Smaller Inside Water Meter Setting W/7.1
- 1-1/2-inch Inside Water Meter Setting When Meter Room Is Not Adjacent to Exterior Building Walls W/7.2a
- 1-1/2-inch Inside Water Meter Setting When Meter Room Is Adjacent to Exterior Building Walls W/7.2b
- 2-inch Inside Water Meter Setting When Meter Room Is Not Adjacent to Exterior Building Walls W/7.3a
- 2-inch Inside Water Meter Setting When Meter Room Is Adjacent to Exterior Building Walls W/7.3b
- 3-inch, 4-inch and 6-inch Indoor Compound Meter When Meter Room Is Adjacent to Exterior Building Walls W/7.4
- 3-inch, 4-inch and 6-inch Indoor Compound Meter When Meter Room Is Not Adjacent to Exterior Building Walls W/7.5
- 4-inch, 6-inch, and 8-inch Indoor FM Meter When Meter Room Is Adjacent to Exterior Building Walls W/7.6
- 4-inch, 6-inch, and 8-inch Indoor FM Meter When Meter Room Is Not Adjacent to Exterior Building Walls W/7.7
- Fire Hydrant Setting Closed Paving Section W/8.0
- Fire Hydrant Setting Open Paving Section W/8.1
- Continuity Test Station for AWWA C900 PVC Pipe W/9.0
- Continuity Test Station for AWWA C900 PVC Pipe at Fire Hydrant W/9.1
- Air/Vacuum Valve Vault On 30-inch Diameter and Larger Pipes W/10.0
- Details for Air/Vacuum Valve Vault on 30-inch Diameter and Larger Pipes W/10.1
- Air/Vacuum Valve Vault On 30-inch Diameter and Larger Pipes W/10.2
- Entry Port Vault for 36-inch to 48-inch Diameter Pipes W/10.3
- Blind Flange Details for Entry Port Vaults W/10.4
- Air/Vacuum Valve Vault and Entry Port Vault for 36-inch to 48-inch Diameter Pipes W/10.5
- Concrete Vault for Entry Ports W/10.6
- Cast In Place Concrete Top Slab Reinforcing for Air/Vacuum Valve Vault and Entry Port Vaults W/10.7
- Pipe Closure Joint Detail Using MJ Solid Sleeves W/11.0
- Pipe Closure Joint Detail For Exist. ACP Water Mains W/11.1
- Connecting to Existing PCCP Water Main using Ductile Iron Tee W/13.0
- Connecting to Existing PCCP Water Main for 2” and smaller Water Connections W/13.1
- 4-inch, 6-inch, and 8-inch Ultrasonic Meter Vault W/14.0
- 10-inch Ultrasonic Meter Vault W/14.0a
- 4-inch, 6-inch, 8-inch, and 10-inch Ultrasonic Meter Vault Piping Layout W/14.0b
- 4-inch ultrasonic Meter with Check Valve Meter W/14.1a
- 6-inch and 8-inch Ultrasonic Meter with Check Valve Vault W/14.1b
- 10-inch Ultrasonic Meter with Check Valve Vault W/14.1c
Last Modified: November 4, 2021, 12:55 pm EDT